How new car wash correctly

1. Do not spray when the machine is hot:

Sudden changes in temperature by spraying cold water on the hot engine block may damage the metal parts and the cost to repair the damage is not trivial.

Do not spray cold water into the engine is hot

You may wonder about the process of forged metal. Sometimes you see people on television scenes embedded a metal rod into the water red. But it is the process that has been studied for centuries, and unlike you flush on the engine block of a motor blazing. Outer metal layer in contact with cold water, lower the temperature and contraction in the metal layer inside the expansion continues. In the worst case, the engine will be cracked or damaged completely.

Wait a few minutes for your car and let it cool down the car toilet. Doing so may cause you to lose time waiting, but will help you avoid dozens of engine trouble.

2. Prepare thoroughly:

Car washing is not scientific research, but also needs a lot of preparation. You will feel easier if you have all the necessary facilities such as faucets, towel, brush, all kinds of detergent ...

Be careful with cleaning detergents

If you are prepared, you can clean the thick mud clinging layer inside fenders in less than 10 minutes, while you can also take advantage of half an hour struggling with this task because of the lack of tools.

3. Clean the chain before:

Chain car is a pretty easy fouling parts and affect each vehicle's carrying capacity. So you must regularly drive chain and salamanders toilet if you want your car is always in perfect conditions.

Should hygiene chain gear ago

Make use of special detergent to clean the chain. Shampoo or soap usually will not do this and can sometimes affect the durability of the chain.

Note that the chain will do the dirty toilet both cars so you need to do it first.

4-Do not use pressure washers to clean the chain:

Pressure washers dislodge the dirt in the chain very good thanks to the water flow is ejected with great pressure. But precisely because of intense pressure to your abilities damaged chain is also very high.

Limiting pressure on Iguana spray slugs

The rubber rings in the car is also very essential details before water flow pressure. The best way is still to follow the maintenance instructions from the manufacturer.

5. "Soak" car before washing:

Soaked here means wetting car. There were stains stick long and difficult to clean. Sometimes you try to scrub the stains will make your car from scratches and damage to the plastic details.

Restricting the rub too heavy-handed

So you need to wet the car a few minutes to let water seep into the dirt. Meanwhile the scrubbing easier and does not affect your car anymore.

6. Do not rub too hard

If after wetting the stains are still unable to clean them with a dedicated cleaning solution, you should persevere rub over instead of using stronger.

What spending should also gently

Always use a soft cloth to clean the car. Only use the brush on the metal parts such as chains, wheels. Make sure to use the appropriate cleanser and scrub not too rough will make your vehicle paint color fading, scratches and loss of value.

7. Do not misuse the anti-rust oil WD40

Anti-rust oil has many uses. Use WD40 can save you all morning sitting scouring rust stains on the car. However, WD40 is not the solution to everything. Use WD40 as a normal detergent for your vehicle can cause severe damage.

Be careful with rust chemicals

WD40 nature break the rusty metal structure. But if you use too much, WD40 and corrosion penetrates the metal parts do not rust. Would be extremely dangerous if they intended to gradually WD40 important details such as chassis, shock absorbers, ...

It's best to just use WD40 cases rust cleaners. For other stains, you can use appropriate cleaning agents.

8. Beware of multipurpose cleaners

The multipurpose cleaners advertised as a miracle solution can do all the work, saving you hours scouring. But instead of spraying it all into his beloved car, you should take the time to study maintenance instructions of the manufacturer because the details will be made of special material can be damaged when exposed multipurpose cleaners.

Do not overuse detergents

Usually the good detergent chrome surface will not work on a nickel-plated surface, and vice versa. Coats of the new cars are less affected than those from detergents old paint.

Use multipurpose cleanser is not a bad choice, but you must be careful because sometimes they will cause unfortunate damage.

9. Compliance with the order

Motor vehicle with dozens of details need to be cleaned, half of which are not exposed so that you can easily clean. Sanitation cars would be a terrible job if you do not follow the order. You would not know this detail has not yet been cleaned.

Done properly and in the correct order

The best way is to observe your vehicle in advance, to make out the order: the inside before the outside after; the top rear wing front ... But be aware, though what is your order, you still have to "take care of" the chain before, because this is the most dirty parts.

You also need to remember the usual hygiene steps of: wetting, use detergent, scrub, rinse with water.

10. Note the sensitive parts

Countries may affect some parts of the car such as leather saddle and some accessories you installed. Check carefully and remove them before the water spray.

... Will make the car more sleek

Sometimes a number of sensitive parts with a number of certain types of detergents and requires separate toilet. Follow this and you will prolong their lifespan.

Car Wash in clean and less dusty. You will not want to see her newly washed car continued to dust.

 According 175cc.com